Chamfering machine is a small precision machine tool specialized in mold manufacturing, hardware machinery, machine tool manufacturing, hydraulic parts, valve manufacturing, textile machinery chamfering and deburring, planing and other processing methods. It is the trend of mechanical industry to adopt rapid machine chamfering. It overcomes the processing shortcomings of existing machinery and electric tools, and has the advantages of convenience, rapidity and accuracy. It is the best choice for chamfering of metal objects at present. It can be divided into straight chamfer and curve chamfer according to chamfer requirements.

The following explains the debugging and use of the chamfering machine:

1、 Commissioning steps

1. Adjustment chamfering procedure

Chamfering machine belongs to CNC lathe, which is controlled by computer in real time to complete automatic chamfering. Chamfering size can be adjusted by adjusting the programming method of parts on steel plate.

2. Adjust the chamfer direction

The correct direction of the chamfer can ensure that the last cut edge is mostly separated from the motherboard, so as to resist the thermal deformation stress. Otherwise, the chamfer will be displaced and the size will be out of tolerance.

3. Adjust the chamfering sequence

The chamfering sequence of the chamfering machine refers to the sequence of chamfering several nested nested nested parts on the steel plate, which generally follows the principle of "inside first, outside first, small first, large second". The size of the chamfer can also be adjusted by adjusting the chamfering sequence of the chamfering machine.

2、 Precautions for use of chamfering machine

1. Before work, oil shall be injected in strict accordance with the lubrication regulations, and the oil volume of the gear chamfering machine shall be appropriate, the oil path shall be smooth, the oil pointer shall be eye-catching, and the oil cup and felt shall be clean.

Check whether each operating handle is safe, reliable and flexible in the safety devices and electrical appliances. Run it for about 5 minutes without load, and use it only after it is confirmed to be in good condition.

3. After the machine tool is started, the operator should always pay attention to the operation of each part. In case of abnormal sound, temperature rise, lubrication, etc., stop the machine immediately, and continue to use after troubleshooting.

4. After work, the equipment must be checked and cleaned, the chamfering machine shall be maintained daily, all handles shall be placed in neutral, and the power supply shall be cut off to achieve tidiness, cleanness, lubrication and safety.