Multi function tool grinder, belonging to the mechanical category; It is mainly composed of a grinding wheel sliding plate round-trip mechanism, a grinding wheel rotary motion mechanism, a grinding wheel rotary table, a vertical stroke sliding plate, a zoom reading microscope device, a tool holder, a tool holder longitudinal adjustment mechanism, a tool holder transverse adjustment mechanism, a tool holder rotation mechanism, a measuring head rotation mechanism, etc. on the lathe bed. The grinding wheel sliding plate round-trip mechanism is located on the upper left side of the lathe bed, the grinding wheel rotary mechanism is located on the vertical stroke sliding plate, and the vertical stroke sliding plate is also equipped with a grinding wheel rotary table, A zoom reading microscope is arranged above the grinding wheel, and a knife clamp or a measuring head rotating mechanism is arranged at the upper right side of the bed.

Introduction editor

Multi function tool grinder, belonging to the mechanical category; It is mainly composed of a grinding wheel sliding plate round-trip mechanism, a grinding wheel rotary motion mechanism, a grinding wheel rotary table, a vertical stroke sliding plate, a zoom reading microscope device, a tool holder, a tool holder longitudinal adjustment mechanism, a tool holder transverse adjustment mechanism, a tool holder rotation mechanism, a measuring head rotation mechanism, etc. on the lathe bed. The grinding wheel sliding plate round-trip mechanism is located on the upper left side of the lathe bed, the grinding wheel rotary mechanism is located on the vertical stroke sliding plate, and the vertical stroke sliding plate is also equipped with a grinding wheel rotary table, The upper part of the grinding wheel is provided with a zoom reading microscope, and the upper part of the right side of the bed is provided with a knife clamp or a measuring head rotating mechanism; The advantages are: wide application range, high production efficiency, several times or even more than ten times of the ordinary tool grinder, and good grinding surface quality; It can be detected online, with convenient operation, labor saving, power saving, low noise, no pollution to the environment, small size, light weight, low input and high output, and can obtain considerable economic and social benefits; The market is extensive and easy to promote.

Editing of operation rules

1、 Before starting the tool grinder, lubricate all parts of the machine tool, check whether the mechanical transmission is normal, whether the switch button is reliable, and ensure that the grinding wheel is intact without damage.

2、 Start the grinding wheel in inching mode to the normal processing speed and idle for five minutes.

3、 When installing the grinding wheel, pay attention to:

1. Before installation, check whether the appearance of the grinding wheel is complete. Tap the grinding wheel gently to hear a clear sound, and ensure that the grinding wheel is intact without damage.

2. The part where the grinding wheel is clamped shall be padded with asbestos pad, and the first balance shall be carried out after clamping, and the second balance shall be carried out after installation and repair. The new grinding wheel shall be idle for five minutes.

4、 The grinding wheel shall not be operated at an overspeed greater than the warning speed.

5、 The grinding amount shall be reasonably selected, and overload grinding is strictly prohibited.

6、 Before grinding, check whether the workpieces are firmly absorbed or clamped. When clamping the high workpieces and workpieces with small bottom area, use stop blocks or special clamps to prevent failures.

7、 No one is allowed to stand in front of the grinding wheel when starting up to prevent the grinding wheel from breaking and flying out or the workpiece from flying.

8、 After the work is completed, the machine tool shall be cleaned, the power supply shall be cut off, the parts shall be placed in order, and the work site shall be kept clean.